Technical and Installation Information in PDF format...
| Specification Book |
| Complete guide to installing BITEC products and conforming to minimum warranty procedures. Please read this manual before proceeding with any roofing or waterproofing installation using these products. All products are manufactured and sold solely for use by professional roofing and waterproofing contractors who have previous experience in the installation and selection of these or similar products. |
| "Roofing Material Specifications and Details" 4.0 MB |
| "Products and Application Guide" 3.7 MB (rev. Sept. 2007) |
| "Mineral Design Brochure" 2.0 MB (rev. Sept. 2007) |
| APP CAP SHEETS |
| (Atactic Polypropylene Modified Bitumen for Commercial, Low Slope Roof Applications) |
| APS-4T (ASTM D6223, Type I, Grade S) |
| APS-5T (ASTM D6223, Type I, Grade S) |
| APM-4.5T (ASTM D6223, Type I, Grade G) |
| APM-4T (ASTM D6223, Type I, Grade G) |
| ISA-4T (ASTM D6223, Type I, Grade S) |
| Mineral Design MDA (ASTM D6223, Type I, Grade G) |
| SBS CAP SHEETS |
| (Styrene-Butadiene-Styrene Modified Bitumen for Commercial, Low Slope, Roof Applications) |
| SPM-4H (ASTM D6162, Type I, Grade G) |
| SPM-4H-250 (ASTM D6162, Type I, Grade G) |
| SPM-3.5H (ASTM D6162, Type I, Grade G) |
| SFM-3.5H (ASTM D6163, Type I, Grade G) |
| SFM-3.5H-FR (ASTM D6163, Type I, Grade G) |
| SPS-3H (ASTM D6162, Type I, Grade S) |
| SPM-4.5T (ASTM D6162, Type I, Grade G) |
| Mineral Design MDS (ASTM D6162, Type I, Grade G) |
| APP BASE SHEET CompaBase |
| (Atactic Polypropylene Modified Bitumen for Commercial, Low Slope Roof Applications) |
| FA-2T (ASTM D6509) |
| SBS BASE SHEETS CompaBase |
| (Styrene-Butadiene-Styrene Modified Bitumen for Commercial, Low Slope, Roof Applications) |
| FS-2H |
| FS-2H-FR (This product is FS-2H with "FR" additive) |
| PS-2H |
| BFS-2H |
| IMPERFLEX SELF-ADHESIVE MEMBRANES |
| (Styrene-Butadiene-Styrene Modified Bitumen for Commercial and Residential Roof Applications) |
| Imperflex MSA |
| Imperflex USA |
| ICE and WATER PROTECTION |
| (Polymer Modified Bitumen for Residential Roof Applications / Not for Use in Commercial Systems) |
| DEFEND (Residential Shingle Underlayment) |
| UDL-40 (Residential Shingle and Tile Underlayment) |
| NON-POLYMER MODIFIED BITUMEN PRODUCTS |
| BETA BASE (ASTM D4601, Type II base sheet) |
| METAL ROOFING SUBSTRATE |
| (Styrene-Butadiene-Styrene Modified Bitumen for Commercial and Residential Metal Roof Applications) |
| MAT-40 |
| ADHESIVES |
| (Styrene-Butadiene-Styrene Modified Bitumen Adhesives for Commercial and Residential Roof Applications) |
| PMA - 2000 (Trowel Grade Adhesive) |
| PMA - 186 (Brush Grade Adhesive) |
| SMALL REPAIR and RESEAL ADHESIVE |
| CompaFlash (Tube of Solid APP or SBS Compound) |
| Disclaimer: All products and specifications are subject to change without notice. BITEC, INC. will make every reasonable effort to provide the consumer with the most up-to-date information either by digital or paper media. BITEC, INC. assumes no responsibility for use or misuse of these products. |
Revised September 17, 2007